Pages

Sunday, February 16, 2014

Small floral earrings

I made a small motif, a floral one. It is crazy how hard one can get out of the floral area of the tatted lace.
The first variant was the green one with pearls. You can see for the lower part the main idea for the lace. (Anchor 12 size thread).


I did not like this variant too much, not elegant enough for me, so I did this other vesion, with 20 Lizbeth thread : 


This seemed too simple, so I made some tests with 40 Lizbeth thread. It was supposed to have a hanging pearl at the bottom ring. Interesting, 3D but not my taste. And the 40 Lizbeth is not that good for bigger rings or chains. 


So I decided the final version for the earring to be this one: 

The pattern is on a base of 5 and there are 2 sensitive points: closing the small bell and placing the pearl before you start the chain. 

To close the bell, you make the usual folded join, but since it is so small, you must not rush when you close it, because it can easily get diformed. 

To place the pearl you must bring the second thread trough the upper part of the bell, place the pearl (in my case a pearl and a small Toho seed bead) and secure it with a paper clip, snug. 

Rough written pattern: 
You need: 1 shuttle (do not cut the thread from the ball), fine crochet hook, 2 pearls (3-4mm), 2 seed beads. 
Before you fill the shuttle with enough thread for the bell the chain and the trefoil, place 1 seed bead. It will have to stay on the balls thread. 

Hanging ring: 
Ring 12ds, close, turn.
Bell: 
Ring: 5 - 9 - 5, close, do not turn.
Ring: 5 + 9 - 5, close, do not turn.
Ring: 5 + 9 + (folded join) 5 close carefully to form the bell.
Make a small lock join to join the last ring to the previous one (like this you will avoid the small gap).
Now take the fine fine crochet hook, pass it through the the small hole and bring the second thread (from the ball)in the middle of the bell. Place the pearl and the seed bead and secure them with a paper clip. Pull the excess of thread, snug firmly. Why the second thread? Because like this the hanging ring can be nicely anchored and will be perpendicular to the bell.

Start chain: 20 ds.

Start the trefoil:
Ring: 10 + (to the secured pearl) 5 - 5, close
Ring: 5+10 - 5
Before you start the last ring, bring the seed bead in position and cut the thread, letting enough thread to hide the end while tatting the last ring. Hold firmly the seed bead at the base of the trefoil, make the loop and start the ring. Before you cut the extra thread after hiding if, pull to place the seed bead perfectly.
Ring: 5+ 15, close, cut and hide the ends.

Now you need to place the earring wires and the pearl. I used a needle and my plyers to prepare the hanging pearl.

The necklace is also almost done. I will publish it when I will have done also the pattern.

Not difficult at all.
If you decide to work with 2 colours, better.
Have fun with it. If you encounter difficulties for any part the this pattern, just let me know, I will make a small picture for this phase.
Sweet bitter experience: I had to rush a bit with this pattern, therefore there is no step by step tutorial this time. The very next day there were already parts of it copyed. But I have to give credit: I was asked for the permission to publish the pictures of the finished piece and Giovi gave all the credit for the idea. There are also honnest tatters out there.





13 comments:

  1. Replies
    1. Thank you very much. If you want me to make you a pair, just e-mail me, it will be a pleasure for me to work them for you, in the colour of your choice. You can also use the pattern if you are a tatter.

      Delete
    2. Thanks for sharing yet another beautiful design, Corina - these are a MUST to make :-)

      Delete
    3. Then have fun! I hardly wait to see your variant!

      Delete
  2. Really nice, thank you for the instructions too, once again great pictures!

    ReplyDelete
  3. Merci Corina, elle est vraiment trop belle cette BO. bisou bisou

    ReplyDelete
    Replies
    1. Merci, Titine. Si tu prends ton coeur à deux mains, tu nous montres le résultat?

      Delete
  4. Very elegant floral earrings!!! :)
    The first ones might be enjoyed by someone else!! :)

    ReplyDelete
    Replies
    1. Thank you! My point too! The first version is already ruined, did nto like it so I used the pearl and the bead for the final one.

      Delete
  5. Lindísimos, Corina. Como siempre un hermoso trabajo que admiro.
    Muchas gracias por la explicación y por tanto trabajo.
    Un saludo. Conchita

    ReplyDelete
  6. Un grand grand merci pour ce sublime patron.
    Voici mon essai, qui manque cruellement d'originalité puisque je me suis inspirée de ta création jusque dans les couleurs ^ ^
    http://frivolitenavette.blogspot.fr/2014/09/bon-anniversaire-mamounette.html

    ReplyDelete
  7. c' est possible d' avoir les explications en français ?
    C' est trop beau
    Merci beaucoup
    kikix08@gmail.com

    ReplyDelete